Best Nail Gun for Quater Round in 2021: Cover Every Gap

One thing that most builders believe is any nailer is good for nailing down quarter round. But that is not entirely true. Even we had the same thinking and opted for a regular nail gun while trying to work on a project. And believe us, things went horribly wrong.

That is where we started doing a bit of research. And after countless hours, we found out that all we were lacking was the best nail gun for quarter round. And after we got our hands on that, quarter round projects went smooth as butter.

But we also found out that not all of the available models are worth purchasing.

However, as you have stumbled upon this article, rest assured that you will have a better idea of the ones that are actually worthy of purchase.

10 Best Nail Gun for Quarter Round

After going through numerous amounts of testing and doing tons of research, we found out some of the modes that perform exceptionally well. And the reviews of each of them is as stated below:

1. WEN 61721

WEN 61721

While trying to get the best nail gun for quarter round, we wanted to pick something that has a large magazine. And that is when we stumbled upon this offering from Wen.

The magazine of this one can hold up to 106 nails. That means you will be able to work for a long time without reloading the magazine. Also, it can make the process of nailing down quarter rounds hassle-free because there is a notch latch. This latch makes clearing out the jammed nails a breeze.

It is highly capable as well. The tool can shoot the 18 gauge brad nails that are from 3/8 inches to 2 inches long. And for the variable pressure dial, you can get proper control over each of the fires.

Talking of which, it utilizes ¼ inches NPT air inlet. That fitting is going to ensure that there is a lower chance of air getting leaked. As a result, you will be highly efficient with the air compressor as well. There is a depth adjustment wheel too. It will enhance the overall control and allow you to be highly precise.

Pros

  • Holds up to 106 nails
  • Uses ¼ inches NPT fitting
  • Sports a depth adjustment wheel
  • Has a variable air pressure knob
  • Easy to remove jams

Cons

  • Does not come with a case
  • There is no air hose included

Why Should You Purchase This Product?

The magazine of this one can hold a large number of nails. And thanks to the depth adjustment wheel and variable pressure knob, you can be highly precise.

2. PORTER-CABLE PCC790LA

PORTER-CABLE PCC790LA

Do not want to deal with air compressors, hose, and costly gases? Want something that offers consistent firing? Well, no matter what you are looking for, this one will fulfill your demands.

This cordless nailer has a proper design for the motor. Due to that, it can offer consistent firing power all the time, even when the battery level is low, or the climate condition is harsh.

There are multiple adjustment settings as well. And the best part is that all of them are tool-free. For being tool-free, it will be easier to adjust them. And for having all of the adjustable settings, it will be easier to drive nails into the quarter rounds precisely.

The unit is also pretty light in weight. Because of being lightweight and having the center of gravity in the right place, working with it will be easy. Also, you can operate it for a long amount of time without facing any fatigue. It even has LED lights on the front.

Pros

  • Cordless and does not require any hose
  • Offers consistent firing power
  • Has multiple adjustment settings
  • Boasts LED lights
  • Easy to handle

Cons

  • Tends to misfire a lot after a prolonged use
  • Battery capacity is not that large

Why Should You Purchase This Product?

This cordless tool uses a highly capable motor that offers consistent firing power. There are plenty of adjustable settings as well.

3. DEWALT DWFP12231

DEWALT DWFP12231

While there are plenty of nailers for quarter rounds out there, there are few that have a highly reliable motor. And this offering from DEWALT is one of those few.

First, the motor! It does not require any maintenance at all. That means you will not have to go through any hassle to make the offer optimal performance throughout its lifespan. It will not throttle or struggle at any point. And it will last for a long amount of time too.

Releasing the jams will be an easy task as well. Thanks to the proper jam releasing mechanism that is tool-free, you can quickly release the nails that got jammed while working with quarter rounds. Also, it has a depth-of-drive adjustment mechanism that is tool-free.

On that note, the depth wheel has detents for different types of nail heads. So, you can expect to gain a higher amount of accuracy while driving them. It has a non-marring tip as well. The kit also includes a carrying case, which will make the task of storing the tool easy.

Pros

  • Utilizes a maintenance-free motor
  • Has depth-of-drive adjustment wheel
  • Jam releasing mechanism is tool-free
  • Sports non-marring tip
  • Includes a carrying case

Cons

  • Jams too frequently
  • Trigger is a bit stiff

Why Should You Purchase This Product?

It is a nailer that you can rely on fully. The motor does not require any maintenance at all. Also, it has a jam releasing mechanism that is easy to work with.

4. BOSTITCH BTFP1850K

BOSTITCH BTFP1850K

Dealing with small tools to adjust different parameters of the nailer can be a big hassle. However, you will not have to worry about that one bit if you get this offering from BOSTITCH.

Like we mentioned, there will be no need to go through any hassles while operating this device to work with quarter round. All of the adjustable settings are tool-free. So, you can quickly adjust different parameters. Also, it has an adjustable exhaust cap, which will direct the contaminants away from the workpiece.

It even has a no-mar tip on the nose. That will ensure that the device does not leave any scratches on the surface. Also, there will be no dings or dents. The quarter rounds will be flawless. And the adjustable depth guide will make it easier to precisely drive the nails.

The unit is highly capable as well. It can work with 18 gauge nails that are up to 2 inches long. Also, you will get a carrying case with the package. That will make it easier to store the tool properly. It will make the task of carrying it around easily as well.

Pros

  • Adjustable settings are tool-free
  • Has an exhaust cap
  • Features no-mar tip
  • Sports an adjustable depth guide
  • Bundles with a carrying case

Cons

  • Tends to dry fire too frequently
  • Air inlet seal is not that durable

Why Should You Purchase This Product?

According to us, this one is 100 worthy because it has tool-free adjustment parameters. And there is an exhaust that will keep the working space clear.

5. NEU MASTER NTC0040

NEU MASTER NTC0040

Want to get into working with the quarter rounds right after taking the nailer out of the package? Do not want to worry about getting nails separately? In that case, consider this one from NEU MASTER.

Unlike some of the other manufacturers, NEU MASTER includes 800 brad nails with the package. That will enable you to get right into the project after unpacking the tool. Also, you will find 200 staples, which are surely going to come in handy in later projects.

Talking of which, the nailer is highly versatile. It can function like a nailer and stapler at the same time. There is an adjustable power knob. That knob will let you lower or increase the power accordingly. Also, it has a non-marring rubber nose that will work like a charm in offering a flawless finish.

Other than that, it has an ergonomic handle.  There is a soft rubber coating on the surface. And for that reason, it will be possible to comfortably work with it for a long amount of time.

Pros

  • Comes with 800 brad nails
  • Reasonably versatile
  • Has an adjustable power mechanism
  • Features a non-marring rubber nose
  • Sports an ergonomic handle

Cons

  • Some packages might ship with defective nailers
  • Included extension port makes it less powerful

Why Should You Purchase This Product?

The fact that it comes with 800 reasonably good quality nails truly amazed us. Also, it has an adjustable power knob and no-mar tip on the nose.

6. NuMax SFN64

NuMax SFN64

Looking for a 16 gauge nailer? Want to opt for something that has a lightweight body but is highly durable? Have a look at what NuMax is offering here.

The overall construction of the unit is of aluminum. This material is pretty light in weight. And for having such a trait, it should be easier for you to handle it and carry it around. However, it is not flimsy at all. It has a higher durability level and is capable of going through heavy-duty workloads.

This tool also has an ergonomic handle. Thanks to the ergonomic shape, you can hold it with full comfort. Also, there is a rubber coating, which will make it possible to securely hold it while working with the quarter rounds.

Besides that, the jam releasing mechanism is pretty easy to work with. It offers quick and easy access to the jammed nails. There is a no-mar tip on the nose too. That will ensure that the surface does not have any dents, scratches, or dings.

Pros

  • Made of high-quality aluminum
  • Lightweight and easy to operate
  • Has a quick jam releasing mechanism
  • Features an ergonomic handle
  • Sports a no-mar tip

Cons

  • Trigger is not that responsive
  • Not that easy to sink nails properly with it

Why Should Purchase This Product?

The unit is reasonably light in weight. And it has a simple operational procedure and has a quick jam releasing mechanism.

7. KIMO 20V

KIMO 20V

Tools that have user-friendly design are pretty easy to operate. And the same thing applies to nailers as well. Well, if you were looking for something such as that, keep this one from KIMO in your consideration.

This one has an innovative design that is going to make the operational procedure a piece of cake. The magazine has a quick releasing mechanism, and it is pretty easy to load it. And as it can hold up to 100 nails, there will be no need to take it out that frequently either.

It even has a hook on the rear. That hook will let you carry it with you, and it will also make it easier to store the device. There are two different firing modes too. One is sequential, and the other is contact-actuation. And the motor can shoot up to 90 nails in a minute.

Other than that, the overall weight of the unit is not that much. It even has the right weight balance on the handle. That means you will be able to work with it without facing any fatigue problems.

Pros

  • Easy to operate
  • Can hold up to 100 nails
  • Has a hook on the rear
  • Features variable firing modes
  • Packs a highly capable motor

Cons

  • Tends to leave an indent at certain angles
  • Misfires too much when the magazine is low on nails

Why Should You Purchase This Product?

This one is pretty easy to use, thanks to the user-friendly design. Alongside that, it is lightweight and has a highly capable motor inside.

8. NEU MASTER N6013

NEU MASTER N6013

When it comes to having a flawless finish on the quarter rounds, having proper control over the nailer is essential. And this offering from Neu Master offers exactly that!

So what makes it offer a higher level of control? The adjustable power setting would be the direct answer to that! That knob will allow you to lower and increase the power. And you can precisely drive nails on your project by adjusting them accordingly.

The tool is pretty easy to use as well. It has a quick releasing mechanism for the magazine. Moreover, it can work as both a stapler and a nailer. The nails it can handle are from ½ inches to 5/8 inches. And the staplers it works with range from 5/16 inches to 5/8 inches.

There are a couple of safety features as well. One of them will ensure that the rate of unintentional fire is low. And these safety features will further ensure that you get a flawless finish on your workpiece. The handle is pretty ergonomic as well.

Pros

  • Offers a high level of control
  • Easy to operate
  • Works with both nails and staples
  • Has different safety features
  • Features an ergonomic handle

Cons

  • Comes with a vague manual
  • Not that light in weight

Why Should You Purchase This Product?

This offering from NEU MASTER has an adjustable power mechanism. It also boasts plenty of safety features, which will ensure that the workflow remains smooth.

9. CRAFTSMAN CMCN618C1

CRAFTSMAN CMCN618C1

Even though you will find plenty of nailers that are going to be ideal for quarter rounds, not all of them will have a comfortable handle. However, if you were looking for one, have a look at what CRAFTSMAN is offering here.

First of all, the handle that it comes with has an ergonomic shape. Also, it has countered over-molding, which will enhance comfort even further. For having the center of balance at the right place, it will be easier to hold it as well. Basically, you will be able to work for hours without facing any comfort issues.

The tool also has a belt hook on the rear. That will make it easier to carry it around and store it. And, there is a jam releasing mechanism that is tool-free. Because of this jam, there will be no need to worry when jams occur because you will be able to release the jammed nails pretty easily.

It even has depth settings that are also tool-free. The motor is highly capable as well. It holds the ability to offer consistent firing power. And the power will not degrade even when the battery level is low.

Pros

  • Has over-molded handle
  • Features a belt hook
  • Sports a tool-free jam releasing mechanism
  • Handle is ergonomic
  • Offers consistent firing power

Cons

  • A bit on the heavier side
  • Tends to jam pretty easily with longer nails

Why Should You Purchase This Product?

The ergonomic handle is the main selling point of this one. And it has a capable motor as well.

10. Ryobi P320 Airstrike

Ryobi P320 Airstrike

Most cordless nailers will utilize highly capable motors but will rely on a low-capacity battery. But that is not the case for this one that Ryobi is offering.

To start with, the battery that it utilizes has a pretty high capacity. It can fire up to 1700 nails with a single full charge. That means there will be no need to worry about going through the hassle of charging it multiple times while working with the quarter rounds.

Alongside that, as this unit is cordless, you will not have to worry about the hose, compressors, and pricey gases either. It even has a pressure adjustment dial that will let you precisely control the firing power. Also, there is a low nail indicator, which will alert you when the nail amount is low on the magazine.

The handle of the unit has an ergonomic shape as well. For that reason, it will be easier to hold onto it comfortably. Also, it has a depth adjustment knob. By adjusting that, you can accurately place the nails on the quarter rounds.

Pros

  • Utilizes a high capacity battery
  • Cordless and easy to use
  • Has air pressure adjustment dial
  • Features a low nail indicator
  • Sports an ergonomic handle

Cons

  • Jams pretty easily
  • Not that light in weight

Why Should You Purchase This Product?

Due to it using a large capacity battery and different adjustment knobs, we believe that this one is totally worth the money.

What Size Brad Nails for Quarter Round?

Usually, for the quarter rounds, the 18 gauge brad nails are generally used. These nails have the right holding power to hold the quarter rounds into the walls properly. And as they are not that thick, like the 14 gauge nails, you will not have any trouble in setting them flush to the surface.

However, it is possible to use 16 gauge nails as well. They are not that much thicker than the 18 gauge nails. Also, thanks to the higher holding power, if the quarter rounds are thick enough, you would be able to get a flawless result by using them.

Nail Gun for Quarter Round

When it comes to the length, builders would generally use 1.25 inches to 1.5 inches longer nails. But do not use anything that is higher than 1.75 inches because that will make the nails stick out too much from the surface.

Installing Quarter Round Molding With Nail Gun

Want to know how to install a quarter-round molding using a nail gun? Follow these easy-to-follow steps:

  • First and foremost, you need to cut the molding. But do not worry because these are pretty easy to cut, and you can do it using a hack saw.
  • After cutting them, lay them flush to the wall and floor. Without setting them flush, they are going to look weird after you nail them. However, do not worry too much if you can not set them without leaving small gaps because it is possible to fix them using a simple sealant.
  • Use the nailer to nail the molding in place. Here, you need to consider the spacing and the size of the nails. Do not use nails that are longer than the thickness of the quarter rounds.
  • Once you are done with the nailing, use the sealant. However, if the molding is sitting flush with the wall and the floor, there will be no need to use a sealant.
  • Finish the task by covering up nail heads. Here, you need to use the sealant. That will make it possible to achieve a flawless finish in the end.

Frequently Asked Questions 

1. What nail gun do I need for quarter round?

For quarter rounds, usually, 16 and 18 gauge nails are used. Considering that, you can use both the 16 and 18 gauge nailers for the task.

2. Do I need a brad nailer or a finish nailer?

Mostly, you would need a brad nailer for handling quarter-round molding. However, it is possible to use a finish nailer to carry out the task, but they will only be ideal if the molding is relatively thick.

3. How do you nail quarter round with a nail gun?

First, you need to set up the molding flush with the wall and the floor. Then, use the nail gun to attach the molding to the wall. After that, use the sealant to make the gaps disappear and to cover the nail heads.

4. Should you glue or nail quarter round?

Nails are going to have a better holding power than glue. So, we would recommend using them over the glue.

5. Can I use a 16 gauge nailer to install quarter round?

Yes, it is possible to use both 16 gauge and 18 gauge nailers for this task.

Final Words

We can not certainly imagine working with quarter rounds without the best nail gun for quarter round anymore. And we hope that we were able to make it easier for you to choose one of them.

Leave a Comment